Coating Applications EPDM, BUR, METAL
Skylite Construction LLC.
- Offering Various Coatings
- Skylight Construction L.L.C. offers various coatings to protect and extend
the life of existing roof substrates, such as; EPDM, BUR, Bitumins and all
metal surfaces.

Application over build-upWe are committed to the preservation of existing substrates by adding specified coatings that withstand the elements mother nature dishes out. ONE major benefit is the added UV protection.
-

Application over - Added Benefits
- - LOWER ROOF TEMPERATURES - Highly reflective white coatings reflect up to
90+% of the sun's radiant heat, dramatically lowering the temperature of the
underlying roof substrate and preventing further degradation.
- LOWER INTERIOR TEMPERATURES - Since most of the Sun's radiant heat is reflected rather than absorbed into the roof substrate, interior temperatures are reduced dramatically.
- SUSTAINABLE - Roof coating systems require very low maintenance. Through periodic recoating, the elastomeric coating systems can be extended to last the life of the building.
- INDEPENDENT TEST DOCUMENTATION - Numerous case studies by organizations such as the U.S. Department of Energy, Lawrence Berkley National Laboratory, the Florida Solar Energy Center, Tennessee Valley Authority and the Roof Consultants Institute have verified the advantages obtained through the use of reflective coatings systems..
- APPLICATION VERSATILITY - Skylight Construction coating application can be applied to virtually any new or existing roof substrate. The life of built-up, modified bitumen, metal, Hypalon, EPDM, concrete, transite, sprayed in place polyurethane or board-stock insulation, and composite shingle roofs can all be extended dramatically with the application of the specified coating. - Metal Roof Substrates
- As metal roofs age they become more susceptible to corrosion, normally
beginning at the seams and spreading throughout the panel. As gaskets degrade
around the fastners and come loose, allowing additional deflection between
panels, leaks begin to occur. The ROOF MATE System includes primers for
inhibiting the spread of rust, as well as several options on sealing fasteners
and reinforcing seams. Reinforcement methods include polyester fabric,
self-adhesive butyl-backed fabric and discs, or fabric-free mastic systems.

- Built-up & Modified Bitumen Roof Substrates
- Exterior weather conditions are especially harmful to asphalt-based
substrates such as built-up roofing and modified bitumen. Ultraviolet rays and
heat dry out the asphaltic oils, while hot and cold temperature extremes
induce cracking, crazing, seam splits and alligatoring. The ROOF MATE System
prevents further degradation by isolating the roof substrate from the
debilitating effects of UV light and moisture. The system includes a
bleed-blocking basecoat as well as appropriate reinforcement materials for
treating splits, flahings, drains and other detail areas. Severely
deteriorated roofs can be treated with full fabric reinforcement.

- Single Ply Roof Substrates
- Single-ply membranes, such as EPDM, Hypalon, PVC, Neoprene, CSPE, CPE, NBP
and TPO all eventually succumb to the effects of extended exposure to the
elements. These effects typically manifest themselves through degradation of
the surface as it begins to oxidize, check and craze. Seams, whether
heat-welded or glued, also eventually begin to come apart, allowing water
intrusion beneath the membrane. ROOFf MATE, applied directly over these
single-ply substrates, eliminates the need to tear off and /or reapply another
single-ply sheet. By incorporating primers and reinforcement as necessary, the
ROOF MATE System effectively restores the membrane to its original watertight
condition, while its permanent flexibility allows the elastomeric membrane to
expand and contract with movement of the roof.

- Other Roof Substrates
- Concrete, transite, wood and composite shingles have also proven to be
excellent candidates for application of the ROOF MATE Roof Preservation
System. Contact UNITED'S Technical Service Department or your local
Representative for specification assistance on any type of unusual or
challenging roof coating requirement you might have. Chances are, we have a
system designed to effictively extend the life of your particular roof
substrate. ROOF MATE by UNITED COATINGS...Longevity By Design.

