Fast Set Polyurea Coating

Skylite Construction LLC.

Product Description:: Polyshield SS-100 is a state of the art, high performance sprayed plural component polyurea elastomer. It provides a flexible extremely tough monolighic membrane with excellent water and chemical resistance.
Recommended Uses: - Truck bed and undercarriage liner
- Protective elastomer for sprayed in place urethane foam
- Steel tanks, silos and pipes
- Replace or repair failed existing sheet membrane liners
- Membrane covering used w/geotextile fabrics to encapsulate contaminates in landfill applications.
- Liner for concrete tanks, ponds, lagoons, reservoirs, dikes, irrigation ditches, tunnels, barges, etc.
- Encapsulant for styrofoam and other types of flotation
- Protective coatings for decorative products such as props, waterfalls, signage, statues, highway markings, etc.
- Earthen containment lining used with or without geotextile fabric.
- Encapsulant for asbestos & lead paint.
Features:: - Polyshield SS-100 is a seamless membrane that can be handled and walked on within 30 seconds or less from the times it is sprayed.
- Unlike polyurethanes and epoxies Polyshield SS-100 is Hydrophobic and therefore affected very little by damp or cold surfaces. It can be sprayed directly on water or ice and has been sprayed at - 40* F (-40*C) with minimal affect on tack free time.
- Due to its almost instantaneous gel time, Polyshield SS-100 can be built up to any thickness in one application including vertical and overhead surfaces. Eliminates need for multicoat applications.
- Polyshiled SS-100 is 100% solids. No solvents, no V.O.C.'s.
- Polyshield SS-100 has high temperature stability with a working temperature of up to 250*F (121*C) with intermittent temperatures up to 350*F (177*C)
- Standard 1:1 ratio heated plural component equipment developing 1000 lbs. pressure will adequately spray Polyshield SS-100. These include Gusmers model FF and H-II with either a D or GX7 gun.
- Polyshield SS-100 is formulated without the use of catalysts. This increases shelf life of the liquids in the drums as well as enhancing color and light stability in the finished product.